Mobil Pyrotec HFD 46
Fire-Resistant Hydraulic Fluid
Product Description
Mobil Pyrotec HFD 46 is a high performance fire resistant hydraulic fluid. It is designed for use in electro-hydraulic governor control systems of steam turbines, including systems using fine tolerance servo valves. It is also recommended as a fire resistant lubricant in, for example, steam and gas turbines as well as fire resistant hydraulic systems. Mobil Pyrotec HFD 46 is approved by Factory Mutual Insurance Company.
Mobil Pyrotec HFD 46 is formulated to provide good oxidation stability. Physical properties such as foaming, air release and demulsibility are controlled to meet the limits specified by turbine manufacturers.
Mobil Pyrotec HFD 46 has been evaluated in stringent tests for fire resistance. It will burn if the bulk fluid temperature reaches 368ºC and is exposed to an open flame. However, in the spray ignition hot manifold ignition test (Factory Mutual Standard 6930 AMS 3150C) there is no flashing or burning at 704ºC.
Features and Benefits
Mobil Pyrotec HFD 46 has the following benefits:
Inherent resistance to fire hazards
Long component life due to excellent anti-wear properties
Long fluid life due to high oxidation resistance
Factory Mutual approval
Applications
Mobil Pyrotec HFD 46 is recommended for use in:
- Electro-hydraulic governor control systems of steam turbines, especially
where a high performance fluid is required
- Hydraulic and oil circulation
systems operating in conditions subject to fire hazards
Mobil Pyrotec HFD 46 is unsuitable for:
- Hydraulic systems subjected to low temperatures. The normal operating
temperature should normally be up to 65ºC to minimize thermal degradation.
However, it is possible to operate with fluid temperatures up to a maximum of
150ºC.
- Use with Neoprene, nitrile and silicone rubber materials. Mobil
Pyrotec HFD 46 is compatible with seal and hose materials such as butyl rubber
and Viton.
- Use with petroleum oils, conventional soluble emulsions, water
in oil emulsions or water glycol fluids. ExxonMobil will be pleased to give
advice on flushing procedures.
- Use on most paints (other than two part
epoxy paints), enamels and varnishes. Because of the solvent properties of Mobil
Pyrotec HFD 46, it is necessary, therefore, to consider treating all internal
surfaces likely to come into contact with it.
Specifications and Approvals
| Mobil Pyrotec HFD 46 meets or exceeds the requirements of: | |
|---|---|
| Factory Mutual Standard 6930 AMS 3150C | X |
Typical Properties
| Mobil Pyrotec HFD 46 | |
|---|---|
| ISO Viscosity Grade | 46 |
| Viscosity, ASTM D 445, cSt @ 40ºC | 43.4 |
| Viscosity, ASTM D 445, cSt @ 100ºC | 5.0 |
| Pour Point, ºC, ASTM D 97 (max) | -20.0 |
| Flash Point, ºC, ASTM D 92 (min) | 246.0 |
| Color, Visual | Colorless |
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.